Voice Coil Actuator

Voice Coil Actuator With Housing
A VCA in the housing reduces the number of assembly steps

Voice Coil Aktuator mit Gehäuse und Sensor

A voice coil actuator consists of two components: a coil on a carrier and a cylinder with permanent magnets. The force and direction of the coil are directly dependent on the direction and strength of the current.

Due to the low mass of the coil, you can achieve very high acceleration . The prerequisite for this is a correspondingly light load. The force required for acceleration can be over 1,100 N. As the Voice Coil Actuator is a direct drive, there are no losses due to the spindle or gearbox.

The voice coil actuators with housing consist of a voice coil actuator, a guide and a housing. This means you can easily install the VCA and quickly put the actuator into operation.

Voice Coil mit Teilgehäuse

Voice coil actuators with a partial housing consist of a self-aligning bushing and a shaft. Their housing is therefore not complete. There are 3 shaft options for easier system integration: Standard, female thread or male thread.

We are guaranteed to find the right actuator for you - free of charge & without obligation

Enquire now

Advantages with housed voice coil

  • Icon Vorteil You have all the advantages of a voice coil, but they are quicker to install.

Realized locations

  • Pfeil rechtsScanner
  • Pfeil rechtsHandheld devices
  • Pfeil rechtsStaplers
  • Pfeil rechtsSyringes
  • Pfeil rechtsOptics adjustment

Features

  • Icon MerkmalStroke from 4 to 51 mm
  • Icon MerkmalPeak force up to 2.44 kN
  • Icon MerkmalContinuous force up to 1.44 kN
  • Icon MerkmalVarious sizes

LAH series models with housing

Article Peak force Total stroke Continuous force AD Ø Length plus ½ stroke
  (10s) N mm N mm mm
LAH04-10-000A 1.89 4.0 1.11 10.1 25.4
LAH13-18-000A-3E 15.5 6.3 5.07 31.6 45.7
LAH13-18-000A-3S 15.5 6.3 5.07 31.6 45.7
LAH16-23-000A-4E 89.0 6.0 17.0 40.0 58.4
LAH16-23-000A-4S 89.0 6.0 17.0 40.0 58.4
LAH28-53-000A-12E 266 25.0 60.1 70.0 132
LAH28-53-000A-12I 266 25.0 60.1 70.0 132
LAH28-53-000A-12S 266 25.0 60.1 70.0 132
LAH43-86-001Z 1.512 31.7 386 218 108

Models LA series with partial housing

Article Peak force Total stroke Continuous force AD Ø Length plus ½ stroke
  (10s) N mm N mm mm
LA13-11-001A-3E 15,5 6,36 5,07 31,62 27,3
LA13-11-001A-3S 15,5 6,36 5,07 31,62 27,3
LA16-16-001A-4E 89.0 6.36 24.4 40.0 39.6
LA16-16-001A-4S 89.0 6.36 24.4 40.0 39.6
LA28-43-001A-12E 266 25 75,6 70,0 129
LA28-43-001A-12I 266 25 75,6 70,0 129
LA28-43-001A-12S 266 25 75,6 70,0 129
LA100-93-001A-50I 2.447 50,8 1.443 254 236
LA100-93-001A-50S 2.447 50,8 1.443 254 236

Standards and guidelines

  • Icon NormREACH
  • Icon NormRoHS2

We are guaranteed to find the right actuator for you - free of charge & without obligation

Enquire now


To top